Product Description:

T-POL 1050 is a low-viscosity, two-component, liquid, multi-purpose polyurea-based coating and waterproofing material.

Application Areas:

• On concrete and cement-based mineral surfaces,
• Heat resistance performance over a wide temperature range from -40°C to +90°C.
• Can be easily applied in enclosed spaces.
• In laboratories, wet processing areas in the food, chemical, and pharmaceutical industries,
• In factories, storage, and assembly areas,
• In marinas and boats,

Features:

• Excellent mechanical properties.
• Effectively resists chemicals.
• Contains no toxic substances after curing.
• Effective in water vapor permeability: Because the film breathes, moisture accumulation beneath the surface is prevented.
• Excellent heat resistance; the product never softens. The maximum service temperature is 90°C and the maximum shock temperature is 200°C. • Easy to apply. • Seals static cracks. • Impermeable to liquids. • Hygienic and easy to clean. • Resistant to mechanical loads, abrasion, and chemicals. • Cold resistant: The film maintains its elasticity down to -40°C. • Even if T-POL1050 is damaged in any way, the damaged area can be easily repaired quickly. • Although thinning is not required, polyurethane thinner can be used depending on the conditions.

Packaging:

Component A: 25.5 kg net - Component B: 1.5 kg net Total: 27 kg net - 28.50 kg gross

Shelf Life:

Can be stored for a minimum of 12 months in its original, unopened packaging, in a dry place at temperatures between 5ºC and 25ºC.
Do not overload the products, as this could damage the packaging.