Product Description:

A synthetic rubber-based, liquid additive that improves the workability and waterproofing performance of materials such as cement-based mortar, plaster, and screed.

Application Areas:

- In all types of cement mortars,
- In plasters and screeds,
- In tile and ceramic adhesive mortars,
- In repair mortars and cold joints,
- In areas where adhesion is required in concrete repairs,
- In sprinkling applications before plastering,
- As a primer before liquid insulation applications,

Features:

- Ready to use.
- Solvent-free.
- Resistant to UV rays and outdoor weather conditions.
- Unaffected by aging.
- Easy and fast application.
- Breathable.
- Can be painted over

Application Information:

Surface preparation; The application surfaces must be moist. Moistening should be continued until the surface is completely saturated. All surfaces must be clean and free of loose particles. Coatings that may reduce adhesion, such as oil, dirt, paint, cement grout, rust, and salt efflorescence, must be removed before application. For adhesion; 150-200ml/m² is applied to the surface with a brush, undiluted. Immediately after application, the mortar or adhesive is applied to the wet surface within 30-40 minutes at the latest.

Packaging:

5kg, 10kg, and 30kg plastic drums.

Shelf Life:

Can be stored for a minimum of 12 months in its original, unopened packaging in a dry place at a temperature of 5ºC-25ºC.