Product Description:

This is a siloxan-based, transparent insulation product that makes absorbent exterior surfaces waterproof without forming a film on them, without altering their appearance or texture. Because it does not form a film on the surface, it does not hinder, reduce, or distort the breathability of the building or stone. It does not cause darkening or swelling. Its alkali resistance is very high, making it easily applicable to new or old concrete. It prevents salt bleeds and stains caused by the mortar of pressed bricks, natural and artificial stone, or plasters. By preventing wetting, it prevents the loss of the thermal insulation value of buildings. It protects the building from rain damage and corrosion. It extends the life of buildings.

Application Areas:

Applies to all types of mineral-based and absorbent surfaces. Concrete, plaster, brick, briquette, travertine, natural stone, mosaic, aerated concrete, tiles, etc. It is not suitable for use on non-absorbent surfaces such as marble, granite, glass, metal, plastic, or horizontal absorbent surfaces. It is used to protect the exterior walls of buildings with unpainted, absorbent surfaces from rain and its effects.

Features:

-Ready to use. -Solvent-free. -Resistant to UV rays and weather conditions. -Unaffected by aging. -Easy and quick application. -Breathable. -Can be painted over.

Application Method:

Surface Preparation: The application surface must be dry, solid, and free of all dirt, oil, and dust. Application should not be done on wet surfaces. The surface must be allowed to dry completely. Layers that reduce the surface's absorbency must be removed. The surface to be applied must be free of cracks larger than 1 mm; any cracks must be repaired. Application method:Application should be carried out from top to bottom using a brush or spray gun, in at least two coats. The second coat should be applied wet-on-wet before the first coat has completely dried, ensuring the surface is fully saturated. Flammable materials should not be used during application. Eye and skin contact should be avoided, and gloves and goggles should be worn. Application requirements: The second coat should be applied wet-on-wet before the first coat has completely dried, ensuring the surface is fully saturated.

Packaging:

1, 2, and 3 kg plastic drums.

Shelf Life:

Can be stored for a minimum of 12 months in its original, unopened packaging, in dry places at temperatures between 5ºC and 25ºC.